bi amping A7

[pantera74l]

The new A7's show a biamp setup using aN900a crossover.Could I use this set up to modify my A7's for bi-amping?thanks

[LICORNE]

No that's a passive network . It crosses over at 900 HZ . That is all it does.

http://www.rane.com/ac22b.html

Convergence

..........................

[LICORNE]

In active Crossovers the sky is the limit.

They are called processors.

Here is a more sophisticated model.

http://www.tcelectronic.com/Default.asp?Id=5104

Convergence

....................................

[pantera74l]

i want to use a passive crossover look at this http://www.alteclansing.com/legacy/faqs.asp

[LICORNE]

Quote

How do I use separate amplifiers for the high and low frequency drivers?
Remove the vertical jumpers connecting the high and low frequency binding posts. Connect the high frequency amplifier to the top binding posts. Connect the low frequency amplifier to the bottom binding posts.

By removing the vertical jumpers your bi passing the passive network but you still need an active crossover before your amplifiers.To send the low signal to your woofer and the high signal to the HF driver.

It is not very well explained on their part.

Convergence

.....................................